Precision Turned Components in Neemrana
High Accuracy. Flawless Finish.
Ø6 - Ø200 mm, length up to 500 mm
±0.01 mm
Yes — BC Engineering Works supplies CNC turned components to Neemrana. Parts are machined at our workshop in Saddique Nagar, Ghaziabad, about 161 km away (roughly 195 minutes by road), and despatched to Neemrana 2-3 working days after the batch is complete. We machine to ±0.01 mm in mild steel, EN8, EN19, stainless steel, brass and aluminium, take orders from a single prototype to 50,000+ pieces, and invoice with GST.
- Workshop
- Ghaziabad, UP
- Distance to Neemrana
- 161 km
- Typical transit
- 195 min
- Despatch
- 2-3 working days
- Tolerance
- ±0.01 mm
- PIN code
- 301705
- District
- Alwar
6 services · Neemrana
What we machine for Neemrana
Each service has a dedicated page for Neemrana with the full specification, materials and typical applications.
Precision Machined Posts in Neemrana
Strength in Every Detail.
Ø8 - Ø150 mm, length up to 500 mm
±0.01 mm
Precision Grooved Components in Neemrana
Built for Performance. Made to Last.
Ø10 - Ø200 mm
±0.01 mm
High Precision Threaded Rods in Neemrana
Durable. Accurate. Consistent.
M4 - M48, length up to 500 mm
±0.01 mm
Supplying Neemrana
How we work with buyers in Neemrana
We supply engineering firms, fabricators and OEM suppliers working in and around Neemrana Japanese Zone RIICO.
The Bhiwadi, Khushkhera, Chopanki and Neemrana RIICO estates form a major auto component and engineering belt, including a dedicated Japanese industrial zone at Neemrana. Work from here is mostly close-tolerance turned parts and fasteners for automotive and appliance assembly.
Getting parts to you: Via the Peripheral Expressway and NH-48 through the Gurugram–Manesar corridor.
Repeat orders stay identical
The approved drawing, the programme and the tooling setup stay on file, so your second order matches the first without re-development.
Work from your drawing
Send a PDF, DWG or STEP file. No drawing? Send the sample part — we measure it, produce a drawing and get it approved before machining.
Delivery to Neemrana
About 161 km by road. Despatch is 2-3 working days once the batch is inspected. Collection from Ghaziabad is also fine.
Inspection before despatch
Critical dimensions are checked on 100% of the batch with micrometers, bore gauges and thread gauges — not sampled. Dimensional report on request.
Proper GST invoicing
GSTIN 09APOPL3370D1ZS. Every despatch to Neemrana goes out with a GST tax invoice so your input credit is available in full.
| Served from | Saddique Nagar, Ghaziabad, UP 201001 |
|---|---|
| Road distance | approx. 161 km |
| Transit time | approx. 195 min |
| Despatch window | 2-3 working days |
| District | Alwar, Rajasthan |
| PIN code | 301705 |
| Machining tolerance | ±0.01 mm |
| Surface finish | Ra 0.8 – 1.6 µm |
| Order quantity | 1 piece to 50,000+ |
| Lead time | 3 – 10 working days |
| Estates served | Neemrana Japanese Zone RIICO |
| Near | Neemrana Fort |
Collecting instead? The workshop is on Major Asharam Road near the Nagar Nigam
water tank, Saddique Nagar, Ghaziabad. Call +91 82853 12726
before you set out and we will have the consignment packed and ready.
We also deliver near Neemrana
Questions from Neemrana
CNC machining in Neemrana — your questions
Do you supply CNC turned components in Neemrana?
Yes. BC Engineering Works machines all parts at our own workshop in Saddique Nagar, Ghaziabad and delivers to Neemrana regularly. Send your drawing or sample on WhatsApp at +91 82853 12726 and you will normally have a quotation the same working day.
How do I get a quotation?
Send a drawing (PDF, DWG, STEP or a clear photo of the part), the material you want, the quantity and your delivery date. If you do not have a drawing, send the sample part or a sketch with the critical dimensions marked. Quotations are usually issued within one working day.
What is the minimum order quantity?
There is no fixed minimum. We machine single prototype pieces as well as production batches of 50,000 and above. Single pieces carry a higher per-piece rate because setup time is spread over one part instead of a batch.
What tolerance can you hold?
Routine production work is held to plus or minus 0.01 mm on turned diameters with a surface finish of Ra 0.8 to Ra 1.6 micron. Tighter tolerances are possible on specific features; send the drawing and we will confirm what is achievable before quoting.
Which materials do you machine?
Mild steel, EN8, EN19, EN24, EN31, stainless steel 304 and 316, brass, aluminium, alloy steel and free-cutting steel. We can either machine from material you supply or source the bar stock ourselves and include it in the quotation.
How long does delivery to Neemrana take?
Machining lead time is typically 3 to 10 working days depending on quantity and material availability. Dispatch to Neemrana is then 2-3 working days. Urgent and breakdown jobs can be prioritised on request.
Do you provide a GST invoice?
Yes. BC Engineering Works is GST registered under GSTIN 09APOPL3370D1ZS and every despatch goes out with a proper GST tax invoice, so the full input credit is available to you.
Can you machine parts from a sample instead of a drawing?
Yes. Send the physical sample to the workshop. We measure it, produce a working drawing for your approval and then machine against that approved drawing, so there is a documented reference for repeat orders.
Do you handle repeat and scheduled orders?
Yes. Once a part has been approved we keep the programme, tooling setup and approved drawing on file. Repeat orders therefore skip development time and are quoted at the established rate.
How do you check quality before despatch?
Every batch is checked against the drawing with micrometers, vernier calipers, bore gauges and thread gauges. Critical dimensions are inspected on 100 percent of the batch rather than sampled, and we can supply a dimensional report with the consignment on request.
Can you deliver to Neemrana or do I collect?
Both. Parts can be collected from the Ghaziabad workshop, sent by transport to Neemrana, or delivered by our own vehicle for nearby locations. Freight is quoted separately so you can compare it against your own arrangements.
What payment terms do you offer?
New customers normally start with advance or part-advance against the proforma invoice. Credit terms are opened once an account has an order history with us. We accept bank transfer, UPI and cheque.
Need machined parts in Neemrana?
Send a drawing or a photo of the sample part — a written quotation normally follows the same working day.