Precision Turned Components Manufacturer in Ghaziabad

BC Engineering Works manufactures Precision Turned Components to customer drawings at our CNC turning workshop in Saddique Nagar, Ghaziabad. Standard range is Ø6 - Ø200 mm, length up to 500 mm, held to ±0.01 mm with a Ra 0.8 - 1.6 µm surface finish, machined in Mild Steel, EN8, EN19, EN24, SS 304. Orders run from 1 piece (prototype) to 50,000+ batch with a lead time of 3 - 10 working days, and every despatch carries a GST invoice.

About this service

Precision Turned Components machined to drawing

Precision turned components machined on CNC turning centres with live tooling and bar feed. We work from your drawing, sample or 3D model and hold concentricity, runout and surface finish consistently across the whole batch, not just the first article.

Manufactured with advanced CNC turning technology to deliver exceptional dimensional accuracy, smooth surface finish, and consistent quality for industrial applications.

Precision Turned Components — technical specification
Size range	Ø6 - Ø200 mm, length up to 500 mm
Dimensional tolerance	±0.01 mm
Surface finish	Ra 0.8 - 1.6 µm
Materials	Mild Steel, EN8, EN19, EN24, SS 304, SS 316, Brass, Aluminium, Alloy Steel
Order quantity	1 piece (prototype) to 50,000+ batch
Lead time	3 - 10 working days
Process	CNC turning with live tooling, single-point threading, grooving, drilling
Inspection	100% check on critical dimensions; dimensional report on request
Invoicing	GST tax invoice, GSTIN 09APOPL3370D1ZS

Typical applications

Hydraulic cylinders
Pump and valve assemblies
Textile machinery
Agricultural implements
Automotive sub-assemblies
General engineering

Precision Turned Components manufactured by BC Engineering Works, Ghaziabad

Get a quotation

Send the drawing, material and quantity. Written price normally within one working day.

Send enquiry WhatsApp the drawing

No drawing? Send the sample part or a photo with the critical dimensions marked. We produce the drawing, get it approved, then machine.

Delivery areas

Precision Turned Components across Delhi NCR

We machine in Ghaziabad and deliver across NCR and western UP. Pick your location for local delivery details.

Questions

Precision Turned Components — common questions

What surface finish do you achieve on turned components?

Standard production finish is Ra 0.8 to Ra 1.6 micron straight off the CNC turning centre, with no secondary polishing needed for most applications. Where a finer finish is specified we plan an extra finishing pass into the cycle.

Can you hold concentricity between two diameters?

Yes. Where both diameters can be turned in a single chucking we hold them concentric within the same setup, which is far more reliable than re-chucking. Mark the datum on your drawing so we can plan the setup around it.

Do you supply CNC turned components in Delhi NCR?

Yes. BC Engineering Works machines all parts at our own workshop in Saddique Nagar, Ghaziabad and delivers to Delhi NCR regularly. Send your drawing or sample on WhatsApp at +91 82853 12726 and you will normally have a quotation the same working day.

How do I get a quotation?

Send a drawing (PDF, DWG, STEP or a clear photo of the part), the material you want, the quantity and your delivery date. If you do not have a drawing, send the sample part or a sketch with the critical dimensions marked. Quotations are usually issued within one working day.

What is the minimum order quantity?

There is no fixed minimum. We machine single prototype pieces as well as production batches of 50,000 and above. Single pieces carry a higher per-piece rate because setup time is spread over one part instead of a batch.

What tolerance can you hold?

Routine production work is held to plus or minus 0.01 mm on turned diameters with a surface finish of Ra 0.8 to Ra 1.6 micron. Tighter tolerances are possible on specific features; send the drawing and we will confirm what is achievable before quoting.

Which materials do you machine?

Mild steel, EN8, EN19, EN24, EN31, stainless steel 304 and 316, brass, aluminium, alloy steel and free-cutting steel. We can either machine from material you supply or source the bar stock ourselves and include it in the quotation.

How long does delivery to Delhi NCR take?

Machining lead time is typically 3 to 10 working days depending on quantity and material availability. Dispatch to Delhi NCR is then same day or next day. Urgent and breakdown jobs can be prioritised on request.