Precision Turned Components in Noida Sector 10
High Accuracy. Flawless Finish.
Ø6 - Ø200 mm, length up to 500 mm
BC Engineering Works machines CNC Turned Studs to customer drawings and supplies them to Noida Sector 10. The parts are produced on CNC turning centres at our workshop in Saddique Nagar, Ghaziabad, about 18 km from Noida Sector 10. Standard range is M4 - M48, length up to 500 mm held to ±0.01 mm with a Ra 0.8 - 1.6 µm surface finish, machined in Mild Steel, EN8, EN19, EN24, SS 304. Orders run from 1 piece (prototype) to 50,000+ batch, lead time is 3 - 10 working days, and despatch to Noida Sector 10 is same day or next day with a GST invoice.
Specification
CNC Turned Studs we machine for Noida Sector 10
Threaded studs turned and single-point threaded on CNC so the pitch, flank angle and effective diameter stay inside gauge every time. Available in plain, zinc plated, black oxide or as-machined finish in mild steel, EN8, EN19 and stainless.
| Size range | M4 - M48, length up to 500 mm |
|---|---|
| Dimensional tolerance | ±0.01 mm |
| Surface finish | Ra 0.8 - 1.6 µm |
| Materials | Mild Steel, EN8, EN19, EN24, SS 304, SS 316, Brass, Aluminium, Alloy Steel |
| Order quantity | 1 piece (prototype) to 50,000+ batch |
| Lead time | 3 - 10 working days |
| Machining process | CNC turning with live tooling, single-point threading, grooving, drilling |
| Inspection | 100% check on critical dimensions; report on request |
| Supplied to | Noida Sector 10, Gautam Buddha Nagar, Uttar Pradesh |
| Distance from works | approx. 18 km (35 min) |
| Despatch | Same day or next day |
| Invoicing | GST tax invoice, GSTIN 09APOPL3370D1ZS |
Where these parts are used
- Heavy fabrication
- Equipment assembly
- Structural fastening
- Machine bed mounting
- Foundation bolting
- Flange and pipe joints
Supplying Noida Sector 10
Noida and Greater Noida concentrate electronics assembly, consumer appliances, auto components, packaging and plastics processing. Buyers here usually need machined inserts, spindles, shafts and fixture parts to feed assembly and moulding lines.
We deliver cnc turned studs to firms operating in Noida Phase I. If your unit is elsewhere in Gautam Buddha Nagar, that is no problem — tell us the address when you enquire.
Route: Via NH-9 and the Noida Link Road, or the Noida–Greater Noida Expressway for the southern sectors.
Get a price for Noida Sector 10
Send the drawing, material and quantity. Written quotation normally within one working day.
- Tolerance
- ±0.01 mm
- Lead time
- 3 - 10 working days
- To Noida Sector 10
- 18 km
- Despatch
- Same day or next day
No drawing yet? Send a clear photo of the sample part with the key
dimensions written on it. We will produce the drawing, get it approved by you, then machine.
Ordering from Noida Sector 10
From your drawing to parts in Noida Sector 10
Send the enquiry
Drawing or sample photo, material, quantity and the date you need it by.
Quotation
We confirm the tolerance is achievable and send a written price, normally within one working day.
First article
One piece machined and measured for your approval before the batch runs.
Despatch to Noida Sector 10
Same day or next day once inspected, about 18 km by road, with a GST invoice.
Also for Noida Sector 10
Other components we machine for Noida Sector 10
Precision Machined Posts in Noida Sector 10
Strength in Every Detail.
Ø8 - Ø150 mm, length up to 500 mm
High Precision Threaded Rods in Noida Sector 10
Durable. Accurate. Consistent.
M4 - M48, length up to 500 mm
Questions
CNC Turned Studs in Noida Sector 10 — your questions
Which thread standards do you cut on studs?
Metric coarse and fine, BSW, BSF, UNC, UNF and BSP. Threads are single-point cut on the CNC rather than die-cut, so pitch and flank angle stay inside gauge over the full length.
Can studs be supplied plated?
Yes. Zinc plating, black oxide and phosphating are arranged through our regular plating vendors. Tell us the finish at enquiry stage so the correct machining allowance is left on the thread.
Do you supply CNC turned components in Noida Sector 10?
Yes. BC Engineering Works machines all parts at our own workshop in Saddique Nagar, Ghaziabad and delivers to Noida Sector 10 regularly. Send your drawing or sample on WhatsApp at +91 82853 12726 and you will normally have a quotation the same working day.
How do I get a quotation?
Send a drawing (PDF, DWG, STEP or a clear photo of the part), the material you want, the quantity and your delivery date. If you do not have a drawing, send the sample part or a sketch with the critical dimensions marked. Quotations are usually issued within one working day.
What is the minimum order quantity?
There is no fixed minimum. We machine single prototype pieces as well as production batches of 50,000 and above. Single pieces carry a higher per-piece rate because setup time is spread over one part instead of a batch.
What tolerance can you hold?
Routine production work is held to plus or minus 0.01 mm on turned diameters with a surface finish of Ra 0.8 to Ra 1.6 micron. Tighter tolerances are possible on specific features; send the drawing and we will confirm what is achievable before quoting.
Which materials do you machine?
Mild steel, EN8, EN19, EN24, EN31, stainless steel 304 and 316, brass, aluminium, alloy steel and free-cutting steel. We can either machine from material you supply or source the bar stock ourselves and include it in the quotation.
CNC Turned Studs for Noida Sector 10
Send the drawing or sample. You will get a price, a realistic date and an honest answer on the tolerance before you commit.