Precision Turned Components in Alwar
High Accuracy. Flawless Finish.
Ø6 - Ø200 mm, length up to 500 mm
BC Engineering Works machines High Precision Threaded Rods to customer drawings and supplies them to Alwar. The parts are produced on CNC turning centres at our workshop in Saddique Nagar, Ghaziabad, about 186 km from Alwar. Standard range is M4 - M48, length up to 500 mm held to ±0.01 mm with a Ra 0.8 - 1.6 µm surface finish, machined in Mild Steel, EN8, EN19, EN24, SS 304. Orders run from 1 piece (prototype) to 50,000+ batch, lead time is 3 - 10 working days, and despatch to Alwar is 2-3 working days with a GST invoice.
Specification
High Precision Threaded Rods we machine for Alwar
Threaded rods and lead screws cut on CNC rather than rolled, which gives a cleaner thread form and far better pitch consistency over length. Metric, BSW, BSF, UNC, UNF and ACME profiles, in single or multi-start.
| Size range | M4 - M48, length up to 500 mm |
|---|---|
| Dimensional tolerance | ±0.01 mm |
| Surface finish | Ra 0.8 - 1.6 µm |
| Materials | Mild Steel, EN8, EN19, EN24, SS 304, SS 316, Brass, Aluminium, Alloy Steel |
| Order quantity | 1 piece (prototype) to 50,000+ batch |
| Lead time | 3 - 10 working days |
| Machining process | CNC turning with live tooling, single-point threading, grooving, drilling |
| Inspection | 100% check on critical dimensions; report on request |
| Supplied to | Alwar, Alwar, Rajasthan |
| Distance from works | approx. 186 km (225 min) |
| Despatch | 2-3 working days |
| Invoicing | GST tax invoice, GSTIN 09APOPL3370D1ZS |
Where these parts are used
- Adjusting and levelling screws
- Lead screws and actuators
- Linear motion assemblies
- Machine tie bars
- Industrial fastening
- Tie rods
Supplying Alwar
The Bhiwadi, Khushkhera, Chopanki and Neemrana RIICO estates form a major auto component and engineering belt, including a dedicated Japanese industrial zone at Neemrana. Work from here is mostly close-tolerance turned parts and fasteners for automotive and appliance assembly.
We deliver high precision threaded rods to firms operating in Alwar Industrial Area RIICO, MIA Alwar. If your unit is elsewhere in Alwar, that is no problem — tell us the address when you enquire.
Route: Via the Peripheral Expressway and NH-48 through the Gurugram–Manesar corridor.
Get a price for Alwar
Send the drawing, material and quantity. Written quotation normally within one working day.
- Tolerance
- ±0.01 mm
- Lead time
- 3 - 10 working days
- To Alwar
- 186 km
- Despatch
- 2-3 working days
No drawing yet? Send a clear photo of the sample part with the key
dimensions written on it. We will produce the drawing, get it approved by you, then machine.
Ordering from Alwar
From your drawing to parts in Alwar
Send the enquiry
Drawing or sample photo, material, quantity and the date you need it by.
Quotation
We confirm the tolerance is achievable and send a written price, normally within one working day.
First article
One piece machined and measured for your approval before the batch runs.
Despatch to Alwar
2-3 working days once inspected, about 186 km by road, with a GST invoice.
Also for Alwar
Other components we machine for Alwar
Questions
High Precision Threaded Rods in Alwar — your questions
Are your threaded rods rolled or cut?
Cut on the CNC by single-point threading. This gives a cleaner thread form and much better pitch consistency over length than rolled thread, which matters on lead screws and long tie rods.
Do you make ACME and multi-start lead screws?
Yes. ACME, trapezoidal and square thread forms in single or multi-start. Specify the lead, the number of starts and the required backlash with the mating nut when you enquire.
Do you supply CNC turned components in Alwar?
Yes. BC Engineering Works machines all parts at our own workshop in Saddique Nagar, Ghaziabad and delivers to Alwar regularly. Send your drawing or sample on WhatsApp at +91 82853 12726 and you will normally have a quotation the same working day.
How do I get a quotation?
Send a drawing (PDF, DWG, STEP or a clear photo of the part), the material you want, the quantity and your delivery date. If you do not have a drawing, send the sample part or a sketch with the critical dimensions marked. Quotations are usually issued within one working day.
What is the minimum order quantity?
There is no fixed minimum. We machine single prototype pieces as well as production batches of 50,000 and above. Single pieces carry a higher per-piece rate because setup time is spread over one part instead of a batch.
What tolerance can you hold?
Routine production work is held to plus or minus 0.01 mm on turned diameters with a surface finish of Ra 0.8 to Ra 1.6 micron. Tighter tolerances are possible on specific features; send the drawing and we will confirm what is achievable before quoting.
Which materials do you machine?
Mild steel, EN8, EN19, EN24, EN31, stainless steel 304 and 316, brass, aluminium, alloy steel and free-cutting steel. We can either machine from material you supply or source the bar stock ourselves and include it in the quotation.
High Precision Threaded Rods for Alwar
Send the drawing or sample. You will get a price, a realistic date and an honest answer on the tolerance before you commit.