Precision Turned Components in Khekra
High Accuracy. Flawless Finish.
Ø6 - Ø200 mm, length up to 500 mm
BC Engineering Works machines Precision Machined Posts to customer drawings and supplies them to Khekra. The parts are produced on CNC turning centres at our workshop in Saddique Nagar, Ghaziabad, about 33 km from Khekra. Standard range is Ø8 - Ø150 mm, length up to 500 mm held to ±0.01 mm with a Ra 0.8 - 1.6 µm surface finish, machined in Mild Steel, EN8, EN19, EN24, SS 304. Orders run from 1 piece (prototype) to 50,000+ batch, lead time is 3 - 10 working days, and despatch to Khekra is same day or next day with a GST invoice.
Specification
Precision Machined Posts we machine for Khekra
Machined posts, pillars and guide rods produced to tight diameter tolerance with ground-quality finish straight off the machine. Typical work includes die-set pillars, fixture posts and support columns where fit and straightness decide whether the assembly works.
| Size range | Ø8 - Ø150 mm, length up to 500 mm |
|---|---|
| Dimensional tolerance | ±0.01 mm |
| Surface finish | Ra 0.8 - 1.6 µm |
| Materials | Mild Steel, EN8, EN19, EN24, SS 304, SS 316, Brass, Aluminium, Alloy Steel |
| Order quantity | 1 piece (prototype) to 50,000+ batch |
| Lead time | 3 - 10 working days |
| Machining process | CNC turning with live tooling, single-point threading, grooving, drilling |
| Inspection | 100% check on critical dimensions; report on request |
| Supplied to | Khekra, Baghpat, Uttar Pradesh |
| Distance from works | approx. 33 km (65 min) |
| Despatch | Same day or next day |
| Invoicing | GST tax invoice, GSTIN 09APOPL3370D1ZS |
Where these parts are used
- Jigs and fixtures
- Guide pillar assemblies
- Support structures
- Machine guarding
- Die sets and tooling
- Press tools
Supplying Khekra
Baghpat district runs sugar, paper and small engineering units along the Yamuna belt. Work is mostly mill spares, shafts and bushes for continuous-running plant.
We deliver precision machined posts to firms operating in Khekra Industrial Belt. If your unit is elsewhere in Baghpat, that is no problem — tell us the address when you enquire.
Route: Via NH-58 and the Delhi–Meerut Expressway corridor.
Get a price for Khekra
Send the drawing, material and quantity. Written quotation normally within one working day.
- Tolerance
- ±0.01 mm
- Lead time
- 3 - 10 working days
- To Khekra
- 33 km
- Despatch
- Same day or next day
No drawing yet? Send a clear photo of the sample part with the key
dimensions written on it. We will produce the drawing, get it approved by you, then machine.
Ordering from Khekra
From your drawing to parts in Khekra
Send the enquiry
Drawing or sample photo, material, quantity and the date you need it by.
Quotation
We confirm the tolerance is achievable and send a written price, normally within one working day.
First article
One piece machined and measured for your approval before the batch runs.
Despatch to Khekra
Same day or next day once inspected, about 33 km by road, with a GST invoice.
Also for Khekra
Other components we machine for Khekra
Questions
Precision Machined Posts in Khekra — your questions
What straightness can you hold on long posts and pillars?
On posts up to 500 mm we work with centre support and light finishing cuts to control deflection and keep runout low. For long slender parts, tell us the length-to-diameter ratio at enquiry stage so we can plan the support and quote realistically.
Do you supply CNC turned components in Khekra?
Yes. BC Engineering Works machines all parts at our own workshop in Saddique Nagar, Ghaziabad and delivers to Khekra regularly. Send your drawing or sample on WhatsApp at +91 82853 12726 and you will normally have a quotation the same working day.
How do I get a quotation?
Send a drawing (PDF, DWG, STEP or a clear photo of the part), the material you want, the quantity and your delivery date. If you do not have a drawing, send the sample part or a sketch with the critical dimensions marked. Quotations are usually issued within one working day.
What is the minimum order quantity?
There is no fixed minimum. We machine single prototype pieces as well as production batches of 50,000 and above. Single pieces carry a higher per-piece rate because setup time is spread over one part instead of a batch.
What tolerance can you hold?
Routine production work is held to plus or minus 0.01 mm on turned diameters with a surface finish of Ra 0.8 to Ra 1.6 micron. Tighter tolerances are possible on specific features; send the drawing and we will confirm what is achievable before quoting.
Which materials do you machine?
Mild steel, EN8, EN19, EN24, EN31, stainless steel 304 and 316, brass, aluminium, alloy steel and free-cutting steel. We can either machine from material you supply or source the bar stock ourselves and include it in the quotation.
How long does delivery to Khekra take?
Machining lead time is typically 3 to 10 working days depending on quantity and material availability. Dispatch to Khekra is then same day or next day. Urgent and breakdown jobs can be prioritised on request.
Precision Machined Posts for Khekra
Send the drawing or sample. You will get a price, a realistic date and an honest answer on the tolerance before you commit.