BC Engineering Works machines Precision Turned Components to customer drawings and supplies them to Jahangirabad. The parts are produced on CNC turning centres at our workshop in Saddique Nagar, Ghaziabad, about 87 km from Jahangirabad. Standard range is Ø6 - Ø200 mm, length up to 500 mm held to ±0.01 mm with a Ra 0.8 - 1.6 µm surface finish, machined in Mild Steel, EN8, EN19, EN24, SS 304. Orders run from 1 piece (prototype) to 50,000+ batch, lead time is 3 - 10 working days, and despatch to Jahangirabad is 1-2 working days with a GST invoice.
Specification
Precision Turned Components we machine for Jahangirabad
Precision turned components machined on CNC turning centres with live tooling and bar feed. We work from your drawing, sample or 3D model and hold concentricity, runout and surface finish consistently across the whole batch, not just the first article.
| Size range | Ø6 - Ø200 mm, length up to 500 mm |
|---|---|
| Dimensional tolerance | ±0.01 mm |
| Surface finish | Ra 0.8 - 1.6 µm |
| Materials | Mild Steel, EN8, EN19, EN24, SS 304, SS 316, Brass, Aluminium, Alloy Steel |
| Order quantity | 1 piece (prototype) to 50,000+ batch |
| Lead time | 3 - 10 working days |
| Machining process | CNC turning with live tooling, single-point threading, grooving, drilling |
| Inspection | 100% check on critical dimensions; report on request |
| Supplied to | Jahangirabad, Bulandshahr, Uttar Pradesh |
| Distance from works | approx. 87 km (105 min) |
| Despatch | 1-2 working days |
| Invoicing | GST tax invoice, GSTIN 09APOPL3370D1ZS |
Where these parts are used
- Textile machinery
- Agricultural implements
- Hydraulic cylinders
- Automotive sub-assemblies
- General engineering
- Pump and valve assemblies
Supplying Jahangirabad
Sikandrabad and Bulandshahr carry electronics, general engineering and food processing units on the UPSIDC estates. Work from here is typically fixture parts, shafts and sub-assembly components.
We deliver precision turned components to firms operating in Jahangirabad Industrial Belt. If your unit is elsewhere in Bulandshahr, that is no problem — tell us the address when you enquire.
Route: Via the Bulandshahr Road (NH-34) south from Ghaziabad.
Get a price for Jahangirabad
Send the drawing, material and quantity. Written quotation normally within one working day.
- Tolerance
- ±0.01 mm
- Lead time
- 3 - 10 working days
- To Jahangirabad
- 87 km
- Despatch
- 1-2 working days
No drawing yet? Send a clear photo of the sample part with the key
dimensions written on it. We will produce the drawing, get it approved by you, then machine.
Ordering from Jahangirabad
From your drawing to parts in Jahangirabad
Send the enquiry
Drawing or sample photo, material, quantity and the date you need it by.
Quotation
We confirm the tolerance is achievable and send a written price, normally within one working day.
First article
One piece machined and measured for your approval before the batch runs.
Despatch to Jahangirabad
1-2 working days once inspected, about 87 km by road, with a GST invoice.
Also for Jahangirabad
Other components we machine for Jahangirabad
Precision Machined Posts in Jahangirabad
Strength in Every Detail.
Ø8 - Ø150 mm, length up to 500 mm
High Precision Threaded Rods in Jahangirabad
Durable. Accurate. Consistent.
M4 - M48, length up to 500 mm
Questions
Precision Turned Components in Jahangirabad — your questions
What surface finish do you achieve on turned components?
Standard production finish is Ra 0.8 to Ra 1.6 micron straight off the CNC turning centre, with no secondary polishing needed for most applications. Where a finer finish is specified we plan an extra finishing pass into the cycle.
Can you hold concentricity between two diameters?
Yes. Where both diameters can be turned in a single chucking we hold them concentric within the same setup, which is far more reliable than re-chucking. Mark the datum on your drawing so we can plan the setup around it.
Do you supply CNC turned components in Jahangirabad?
Yes. BC Engineering Works machines all parts at our own workshop in Saddique Nagar, Ghaziabad and delivers to Jahangirabad regularly. Send your drawing or sample on WhatsApp at +91 82853 12726 and you will normally have a quotation the same working day.
How do I get a quotation?
Send a drawing (PDF, DWG, STEP or a clear photo of the part), the material you want, the quantity and your delivery date. If you do not have a drawing, send the sample part or a sketch with the critical dimensions marked. Quotations are usually issued within one working day.
What is the minimum order quantity?
There is no fixed minimum. We machine single prototype pieces as well as production batches of 50,000 and above. Single pieces carry a higher per-piece rate because setup time is spread over one part instead of a batch.
What tolerance can you hold?
Routine production work is held to plus or minus 0.01 mm on turned diameters with a surface finish of Ra 0.8 to Ra 1.6 micron. Tighter tolerances are possible on specific features; send the drawing and we will confirm what is achievable before quoting.
Which materials do you machine?
Mild steel, EN8, EN19, EN24, EN31, stainless steel 304 and 316, brass, aluminium, alloy steel and free-cutting steel. We can either machine from material you supply or source the bar stock ourselves and include it in the quotation.
Precision Turned Components for Jahangirabad
Send the drawing or sample. You will get a price, a realistic date and an honest answer on the tolerance before you commit.