BC Engineering Works machines Precision Turned Components to customer drawings and supplies them to Pilkhuwa. The parts are produced on CNC turning centres at our workshop in Saddique Nagar, Ghaziabad, about 25 km from Pilkhuwa. Standard range is Ø6 - Ø200 mm, length up to 500 mm held to ±0.01 mm with a Ra 0.8 - 1.6 µm surface finish, machined in Mild Steel, EN8, EN19, EN24, SS 304. Orders run from 1 piece (prototype) to 50,000+ batch, lead time is 3 - 10 working days, and despatch to Pilkhuwa is same day or next day with a GST invoice.
Specification
Precision Turned Components we machine for Pilkhuwa
Precision turned components machined on CNC turning centres with live tooling and bar feed. We work from your drawing, sample or 3D model and hold concentricity, runout and surface finish consistently across the whole batch, not just the first article.
| Size range | Ø6 - Ø200 mm, length up to 500 mm |
|---|---|
| Dimensional tolerance | ±0.01 mm |
| Surface finish | Ra 0.8 - 1.6 µm |
| Materials | Mild Steel, EN8, EN19, EN24, SS 304, SS 316, Brass, Aluminium, Alloy Steel |
| Order quantity | 1 piece (prototype) to 50,000+ batch |
| Lead time | 3 - 10 working days |
| Machining process | CNC turning with live tooling, single-point threading, grooving, drilling |
| Inspection | 100% check on critical dimensions; report on request |
| Supplied to | Pilkhuwa, Hapur, Uttar Pradesh |
| Distance from works | approx. 25 km (50 min) |
| Despatch | Same day or next day |
| Invoicing | GST tax invoice, GSTIN 09APOPL3370D1ZS |
Where these parts are used
- Textile machinery
- Automotive sub-assemblies
- Agricultural implements
- General engineering
- Hydraulic cylinders
- Pump and valve assemblies
Supplying Pilkhuwa
The Hapur, Pilkhuwa and Dhaulana belt handles steel pipes and tubes, textile printing and general engineering. Requirements tend to be rollers, shafts and machine spares for pipe and printing plant.
We deliver precision turned components to firms operating in Pilkhuwa Textile and Engineering Belt. If your unit is elsewhere in Hapur, that is no problem — tell us the address when you enquire.
Route: Via NH-9 east through Hapur.
Get a price for Pilkhuwa
Send the drawing, material and quantity. Written quotation normally within one working day.
- Tolerance
- ±0.01 mm
- Lead time
- 3 - 10 working days
- To Pilkhuwa
- 25 km
- Despatch
- Same day or next day
No drawing yet? Send a clear photo of the sample part with the key
dimensions written on it. We will produce the drawing, get it approved by you, then machine.
Ordering from Pilkhuwa
From your drawing to parts in Pilkhuwa
Send the enquiry
Drawing or sample photo, material, quantity and the date you need it by.
Quotation
We confirm the tolerance is achievable and send a written price, normally within one working day.
First article
One piece machined and measured for your approval before the batch runs.
Despatch to Pilkhuwa
Same day or next day once inspected, about 25 km by road, with a GST invoice.
Also for Pilkhuwa
Other components we machine for Pilkhuwa
High Precision Threaded Rods in Pilkhuwa
Durable. Accurate. Consistent.
M4 - M48, length up to 500 mm
Precision Turned Components in nearby areas
Questions
Precision Turned Components in Pilkhuwa — your questions
What surface finish do you achieve on turned components?
Standard production finish is Ra 0.8 to Ra 1.6 micron straight off the CNC turning centre, with no secondary polishing needed for most applications. Where a finer finish is specified we plan an extra finishing pass into the cycle.
Can you hold concentricity between two diameters?
Yes. Where both diameters can be turned in a single chucking we hold them concentric within the same setup, which is far more reliable than re-chucking. Mark the datum on your drawing so we can plan the setup around it.
Do you supply CNC turned components in Pilkhuwa?
Yes. BC Engineering Works machines all parts at our own workshop in Saddique Nagar, Ghaziabad and delivers to Pilkhuwa regularly. Send your drawing or sample on WhatsApp at +91 82853 12726 and you will normally have a quotation the same working day.
How do I get a quotation?
Send a drawing (PDF, DWG, STEP or a clear photo of the part), the material you want, the quantity and your delivery date. If you do not have a drawing, send the sample part or a sketch with the critical dimensions marked. Quotations are usually issued within one working day.
What is the minimum order quantity?
There is no fixed minimum. We machine single prototype pieces as well as production batches of 50,000 and above. Single pieces carry a higher per-piece rate because setup time is spread over one part instead of a batch.
What tolerance can you hold?
Routine production work is held to plus or minus 0.01 mm on turned diameters with a surface finish of Ra 0.8 to Ra 1.6 micron. Tighter tolerances are possible on specific features; send the drawing and we will confirm what is achievable before quoting.
Which materials do you machine?
Mild steel, EN8, EN19, EN24, EN31, stainless steel 304 and 316, brass, aluminium, alloy steel and free-cutting steel. We can either machine from material you supply or source the bar stock ourselves and include it in the quotation.
Precision Turned Components for Pilkhuwa
Send the drawing or sample. You will get a price, a realistic date and an honest answer on the tolerance before you commit.